Skip to search formSkip to main contentSkip to account menu
DOI:10.1109/PCICON.2011.6085880 - Corpus ID: 5928412
@article{Jagaduri2011FieldEO, title={Field evaluation of automatic restart of essential motors using microprocessor-based protective relays}, author={Rekha T. Jagaduri and D. N. Bradley and Lawrence J. Kingrey and Tuyen Nguyen}, journal={2011 Record of Conference Papers Industry Applications Society 58th Annual IEEE Petroleum and Chemical Industry Conference (PCIC)}, year={2011}, pages={1-9}, url={https://api.semanticscholar.org/CorpusID:5928412}}
- R. Jagaduri, D. Bradley, Tuyen Nguyen
- Published in Petroleum and Chemical… 28 November 2011
- Engineering
Industrial facilities that employ numerous electrical motors for vital functions require either continuous operation, ride through, and/or automatic restart operation for abnormal conditions, such as momentary voltage loss, voltage dips, or other system voltage transients. With large essential motors, it is impractical or not economical to provide an uninterruptible power source. Therefore, the next option to reduce the effects of transient interrupted service is to automatically sense the…
7 Citations
4
2
Figures and Tables from this paper
- figure 1
- figure 10
- figure 2
- figure 3
- figure 4
- figure 5
- figure 6
- figure 7
- figure 8
- figure 9
- figure A-1
- table I
- table II
7 Citations
- Selahattin KucukLuis Fernandez FernandezM. BayrakA. Yilmaz
- 2015
Engineering, Environmental Science
2015 9th International Conference on Electrical…
A primary goal of an industrial electric power system is to minimize production losses in industrial facilities maintaining the industrial process running after the occurrence of certain supply…
- 2
- PDF
- D. Solovev
- 2017
Engineering, Physics
2017 Dynamics of Systems, Mechanisms and Machines…
Improvements are suggested for measurement circuits used in electromechanical and microprocessor relays designed for protection of motor drives against open phase condition with the use of instrument negative sequence current transducer designed by the authors.
- 10
- TurgiAustrasse
- 2014
Engineering, Physics
Voltage dips or power interruptions in the grid cause huge problems for the users. The ride-through behavior of frequency converters can be a very good solution to bridge the gap. But how does the…
- PDF
- Selahattin KucukLuis Fernandez Fernandez
- 2017
Engineering, Environmental Science
2017 4th International Conference on Electrical…
This paper describes the works and studies made in one Industrial Plant in TURKEY, to upgrade the existing 45 MW electrical generation capacity to 85 MW through an interconnection between the…
- 2
- Gregory J. ClementF. EndrejatJ. PriceNina Sadighi
- 2019
Engineering, Environmental Science
IEEE Industry Applications Magazine
An overview of the associated design process and technical solutions to address critical load needs is provided and a methodology that evaluates whether a load should be classified as critical is discussed.
- 2
- Tino WymannPieder Jorg
- 2014
Engineering
2014 Petroleum and Chemical Industry Conference…
This paper reconsiders the topic of ride-through behavior of frequency converters on a power drive system level and gives practical information to the users, based on the experience of a drive manufacturer.
- 18
- Gregory J. ClementF. EndrejatJ. PriceNina Sadighi
- 2017
Engineering, Environmental Science
2017 Petroleum and Chemical Industry Technical…
Every facility, regardless of size, has process loads which are considered critical. However, what does the term “critical” mean? A process engineer's ideas of a critical load may differ from those…
- 3
10 References
- M. Bollen
- 1994
Engineering, Physics
Proceedings of 1994 IEEE Industry Applications…
The assumption that a voltage sag is rectangular, no longer holds in a system with large induction motor loads. The motors decelerate during the short circuit. After fault-clearing they will…
- 145
- PDF
- R. HannaP. BulmerR. Kohistānī
- 1992
Engineering
[1992] Record of Conference Papers Industry…
When a refinery electrical distribution system experiences severe voltage dips or short duration power interruptions, online starters deenergize and motors stop, resulting in plant upset. To minimize…
- 7
- J. NovakR. Kirby
- 2010
Computer Science, Engineering
IEEE Transactions on Industry Applications
A recently commissioned electrical substation design philosophy is described, including implementation, construction, maintenance, and performance with μP-based protective relaying, metering, and control schemes that extensively utilize the interdevice DB exchange and programmable logic capabilities of time-synchronized μP technology.
- 11
- V. PopescuL. Oprea
- 2004
Engineering, Environmental Science
Proceedings of the 12th IEEE Mediterranean…
The optimization task carried out based on dynamic simulations identified the shortest reacceleration schedule acceptable from technological as well as from equipment overload points of view and validated this under different fault clearing assumptions and system operation cases.
- 6
- Barruquer Moner
- 1971
1. Arantes, L. : Potentialized anaesthesia in ophthalmology. 111 Congressus Mundialis Anaesthesiologiae. Tomo 11. 1964:ll-45. 2. Aserinsky, E. and de Bias, D. A . ; Suppression of oculo-cardiac…
- 716
- PDF
Related Papers
Showing 1 through 3 of 0 Related Papers
Fig. 2 Partial One-Line Diagram
Published in Petroleum and Chemical Industry Technical Conference 2011
Field evaluation of automatic restart of essential motors using microprocessor-based protective relays
R. JagaduriD. BradleyL. KingreyTuyen Nguyen
Figure 3 of 13